Spreader operated rams with Zip-Nut Technology

 

Battery Operated Extrication Equipment

Cutters Spreaders

 

 

 

 

Power Hawk Extrication Tools are Hydraulic Free.

Power Hawk is an All-Electric “jaws” type rescue tool utilizing Curtiss-Wright aerospace gear technology.

This technology was developed for  demanding military, fighter-jet, flight control applications. 

12 Volt DC Operation

By eliminating hydraulics and utilizing 12 Volts DC power, the VERSATILITY of the POWER HAWK makes it the perfect choice for:

• Vehicle extrication
 • Damage Control
• Aircraft rescues
• Rapid-Intervention Teams
• Collapse rescues
• Remote rescues
• Indoor and confined space operations
• Forcible entry
• Special operations

Features:

• NO Hydraulics
• Lightweight & Portable
• Rapid Response/No Setup
• Runs in O2 Depleted Atmosphere
• Quiet Operation
• Long-lasting Battery
• Low Maintenance
• Interchangeable Spreaders and Cutters
• Compact/Saves Compartment Space
• 12 Volts DC Power/Back-up
• readily available
• Simultaneously run accessories such
• as the Milwaukee Sawzallฎ,RamFan
• blower, lights, winches, and more.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Three interchangeable heads are available for the Power Hawk 12VDC extrication tool.   Spreader, Straight Blade Cutter/Spreader and Curved Blade Cutter.

Switching from the Straight Blade Cutter/Spreader  to the Curved Blade Cutter or the Spreader takes only seconds and requires no tools. 

In today's tight compartments and tight budgets one tool can do the job of three separate tools saving your department valuable resources.

 

 

 

 

 

 Just plug the Power Hawk tool into the rechargeable battery pack and you are ready to work...

Nothing is simpler or safer than that. 

 

 

 

 

A simple battery pack is all that's needed to operate the Power Hawk extrication tool.

No hoses to leak and high pressure couplings to fail,  No hose reels running off your truck for people to trip over, no hydraulic pumps to break down or fail to start at the scene, no fuel cans or mixing oil, no noise and no fumes to contend with, no overheated hydraulic fluid to ruin your tools, no leaky seals fouling up your trucks and gloves or spraying oil onto your victims

 

 

 

 

 

 

 

The Power Hawk head swivels up to 70-degrees. 

 This feature allows the operator to move the tool as it begins to bite into the metal.   With other tools as the cutters bite in, the tool moves you. 

Call our office for a free demo 

 

 

 

 

 

 

 

 

 

Power Hawk Specifications, Click here  Specifications

 

Power Hawk Rams operate with any manufacturers spreader.   Just put your own spreader jaws in the opening and transfer that power into a ram head.

The head and foot of the Power Hawk Ram have very  sharp deep-set teeth to grab and set into any material.  

We tested a set on a dash lift.   Setting the foot of the ram in the middle of the rocker on top of the plastic trim and the top of the ram on the "A" Post. The Power Hawk spreader was slipped into the groove and opened.  The ram foot pierced the plastic grabbing the rocker completing a successful dash lift. Our extrication pro was very impressed!

Power Hawk Rams use Zip-Nut Technology to lock the ram in place.  So as you spread, it stays put  No pins required.  To remove, just turn and lift the collar then slide the ram down.  

Power Hawk Rams come in two sizes, match up with two extension pieces for longer spans and any job becomes a simple, safe job with  Power Hawk rams.

 

 

 

 

 

POWER HAWK RAMS